Spa Frog Mineral Sanitizer - "Two Pack" - Saving of 10%
For Spas & Hot Tubs
Up to 50%* reduction in chlorine or bromine use!
Eliminates daily dosing for less work
The FROG® Mineral System+ improves water quality by:
* Destroying bacteria for improved clarity.
* Helping to maintain a neutral pH.
* Reducing bromine or chlorine use for softer water.
Offers More Relaxation
* Simple a more enjoyable spa experience.
* Water feels softer with a crystal clear shine
* Inserts easily into filter.
* Lasts four full months
Product Description: FILTER FROG® contained a patented mineral formula that destroys bacteria while neutralizing acids, which helps keep the pH in an acceptable range with less monitoring. Using the FORG® Mineral System with reduced levels of bromine or chlorine improves spa pleasure by reducing the problems associated with bromine or chlorine, including faded bathing suits, premature damage to spa equipment or surfaces and smelly odors.
Replace FILTER FROG® after 4 months or when draining and refilling spa with fresh water.
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
Directions for Use: For use in spas up to 600 gallons. Ensure all spa equipment is working properly. The pump and filter should be operated at least 3 hours per day. Clean filter following manufacturer’s directions. Adjust pH to between 7.2 – 7.8. With a freshly filled spa, establish a bromine or chlorine residual of 1.0 – 2.0 ppm with an EPA approved spa shock or by other means. Always maintain a bromine or chlorine residual of at least 1.0 ppm. Shock spa once a week or as needed. When using other products as outlined in directions for this product, always follow directions on those products. Keep the spa free of leaves and debris.
Installing FILTER FROG®: Set reminder dial to four mouths from month of installation. Turn dial by hand or with a coin if needed. Please FILTER FROG® in one of the following locations;
a. Majority of Spas: Insert FILTER FROG® inside filter cartridge core. Do not allow product to sit too low in the filter. If blocking water flow, install in filter well. If installed inside a standpipe, attach a string to the Frog head handle for easy removal.
b. High Flow Spas: On skimmer filters with 2.5 PH or larger pump motors, place FILTER FROG® in filter well outside the filter cartridge.
c. Small Cartridge or Other Spas: Place FILTER FROG® in skimmer tray.
DISPOSAL: After four months of use, or when draining and refilling the spa with fresh water, discard FILTER FROG® in trash even if, upon shaking, it appears there is spent media left inside. Once wetted, the time released minerals in FILTER FROG® are effective up to four months. Non-refillable container. Do not reuse or refill this container.
NOTE: Buyer assumes all responsibility for safety and use not in accordance with directions.
KING TECHNOLOGY, INC.
530 11th Avenue South
Hopkins, MN 55343
* Compared to the minimum ANSI recommended bromine or chlorine level of 2.0 ppm in a spa.
+ SPA FROG® Mineral System consists of the FROG® minerals silver chloride and carbonate used with 1.0 ppm bromine or chlorine. FILTER FROG® must be used in conjunction with an EPA registered bromine or chlorine spa product or a bromine or chlorine delivery device.